Skip Navigation
Send E-MailCompany InformationCall us at 212-555-1212

12-RA SERIES RIGHT ANGLE GRINDERS & SANDERS (.3 H.P.)

Model 12RA action shot.

Features:

  • Small compact tool design reaches remote areas.
  • Selection of front or rear exhaust models.
  • Heavy-duty 3 piece collet is available with 1/4" or 1/8" insert.
  • Spiral-bevel gears provide smooth operation and long life.
  • Lightweight alluminum housing.
  • Choice of lever or lockout lever throttle.
12-RA Angle grinder with front exhaust. Your choice of 1/4" or 1/8" collet insert.
12-RA Angle grinder same as above but shown with a sanding pad.
12-RAK Angle grinder shown with a safety lock lever.

New!

1205-RAK Angle grinder with a rear exhaust. (shown with a safety lock lever.)

 
Model Throttle Type Exhaust Location Speed Collet Size Angle Head Height Length Case Dia. Weight Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
12-RA Lever Front 18,000 or
20,000
R.P.M.		 1/4" or 1/8" collet insert (1/4" is standard) 2.953"
75mm		 5.600"
143mm		 1.500"
38.1mm		 .94 lbs
.42kg		 1/4" 1/4" .3 H.P. 19 cfm Parts Print
12-RAK Lockout Lever Parts Print
1205-RA Lever Rear 1.359"
34.52mm		  
1205-RAK Lockout Lever  


Recommended working air pressure: 90 p.s.i.
Standard Equipment: Choice of (1) 1/4" or 1/8" collet insert, wrenches, screen bushing.

 

44-RA RIGHT ANGLE GRINDERS & SANDERS (.9 H.P.)

Features:

  • A stainless steel right-angle head resists corrosion and is extra strong.
  • Taller gears provide more power at a lower RPM.
  • Spiral-beveled gears provide smooth operation and long life.
  • Removable side handle.
  • Aluminum or steel case.
  • Adjustable side exhaust.
  • Choice of lever or lockout lever throttle.

 

44-RAC angle grinder with built-in collet. (shown with carbide burr) Standard speed is 11,000RPM.

44-RA angle grinder with 3/8-24 threaded spindle. A 5/8-11 spindle is available upon request.

  • (This grinder is shown with a 4" guard)(Other guard sizes are available at no extra cost.) Standard speed is 11,000RPM.

44-RAE Extended Die grinder with a 3/8-24 threaded spindle.

  • A 5/8-11 spindle is available upon request. Multiple sized guards are available. (4",5" or 6" guard)
  • Standard speed is 11,000RPM on this model. For a faster extended Angle grinder. (click here)
Model Speed Spindle Type Length Angle Head Height Weight Motor Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
44-RA

9000 or 11,000RPM
standard

(Specify when ordering)

 3/8"-24 or 5/8-11 8 5/16"-211mm

2.84"

72.1mm

 2 1/2 lbs
1.1 kg		 1 3/4"
44mm		 3/8"
N.P.T.		 3/8" .9
H.P.		 25 cfm Parts Print
44-RAE 11 3/16"-284mm 2 3/4 lbs
1.2 kg		 Parts Print
44-RAC 1/4" Collet 8 5/16"-211mm 2 1/2 lbs.
1.1 kg		 Parts Print
44-RACE 11 3/16"-284mm 2 3/4 lbs
1.2 kg		 Parts Print

*For a lockout lever, add a "K" to end of model number.
**For a steel model, add an "S" to end of model number.
***For a 5/8-11 sindle, add a "Z" to end of model number.
Recommended working air pressure: 90 p.s.i.
Standard Equipment: Choice of 3", 4", 5" or 6" guard, wrenches, wheel washers, spindle nut, side handle, screen bushing.
Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.

45-RA & 49-RA SERIES RIGHT ANGLE GRINDERS & SANDERS (.9 H.P.)

 

Features:

  • A stainless steel right-angle head resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long life.
  • Removable side handle.
  • Aluminum or steel case.
  • Adjustable side or rear exhaust models
  • 49 Series has muffled rear exhaust- exhaust that can be piped away.
  • 49 Series has a durable heat treated aluminum case.
  • Choice of lever or lockout lever throttle.

45-RA a lightweight angle grinder (2.5 lbs.) for Easy Control and Reduced Operator Fatigue.

  • Sold as a grinder, this tool can be converted to a sander by purchasing a 4 inch or 5 inch backing pad assembly which is easily attached to the tool.

  • Standard operating speed is 13500RPM. This tool is also available in an all steel model. (see chart)
45-RAC a lightweight angle grinder with a built-in 1/4" collet spindle.
45-RAE Extended Angle Grinder. Spiral cut bevel gears for optimum transmission of torque to the work piece. Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2" backing pad and disc are attached.


49-RA Angle Grinder has a muffled rear exhaust that can be piped away from the operator. This model also has a heat-treated aluminum case. Standard speed is 13,500 RPM. (You specify the speed when ordering)
447-RAC is a governed angle grinder with a built-in collet. Features a governor capable of slower speeds of 5000-9000RPM. (You specify the speed when ordering)

45-RAE Extended Die grinder with a 3/8-24 threaded spindle.

  • A 5/8-11 spindle is available upon request. Multiple sized guards are available. (4",5" or 6" guard) Standard speed is 13,500RPM on this model.
  • The extended design allows you to reach deep into areas that would be impossible with other tools.
  • Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2" backing pad and disc are attached

Model Speed Spindle Type Exhaust Location Length Angle Head Height Weight Motor Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
45-RA 13,500 Standard or 14,000 RPM 3/8"-24 or 5/8"-11 x .980 long Side 8 5/16"-211mm 2.84"
72.1mm		 2 1/2 lbs
1.1kg		 1 3/4"
4.4cm		 3/8" N.P.T. 3/8" .9 H.P.
675 W		 25 cfm Parts Print
49-RA Rear 7 7/8"-200mm 2 3/4 lbs.
1.2kg		  
45-RAE Side 11 3/16"-284mm 2 1/2 lbs
1.1kg		 Parts Print
45-RAC 1/4" Collet (built-in) Side 8 5/16"-211mm

2 1/2 lbs 1.1kg

 Parts Print
49-RAC Rear 7 7/8"-200mm    
45-RACE Side 11 5/16"-284mm 2 3/4 lbs.
1.2kg		 Parts Print

 

GOVERNED MODELS

Model Speed Spindle Type Exhaust Location Length Angle Head Height Weight Motor Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
447-RA 5000-9000rpm 3/8"-24 or
5/8"-11 		Side 8 5/16"
211mm		 2.84"
72.1mm		 2 1/2 lbs
1.1 kg		 1 3/4"
44mm		 3/8" N.P.T. 3/8" .9 H.P.
675 W		 25 cfm  
447-RAC 1/4" collet  
457-RA 10,000-13,000rpm 3/8"-24 or
5/8"-11 		 
457-RAC 1/4" collet  
447-RAE 5000-9000rpm 3/8"-24 or
5/8"-11 		11 3/16"
284mm		 2 3/4 lbs
1.2 kg		  
447-RACE 1/4" collet  
457-RAE 10,000-13,000rpm 3/8"-24 or
5/8"-11 		 
457-RACE 1/4" collet  

* For a lockout lever, add a "K" to end of model number.
** For a steel model, add an "S" to end of model number when ordering. Model 49 Series grinders only available in aluminum casing.
*** For a 5/8-11 spindle, add a "Z" to end of model number.

Recommended working air pressure: 90 p.s.i.
Standard Equipment: Choice of 3", 4", 5", or 6" guard, wrenches, wheel washers, spindle nut, side handle, screen bushing.
49 Series: Choice of 3", 4",5", or 6" guard, wrenches, wheel washers, spindle nut, side handle, screen bushing, screw-in type muffler.
RAC Series: wrenches, side handle, screen bushing.

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
49 Series piped away exhause nipple and air hose.

 


4400 & 4700 SERIES RIGHT ANGLE GRINDERS & SANDERS (.9 H.P.)

Features:

  • Stainless steel right-angle head resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long life.
  • Steel 1 5/8" housing models fit in the palm of your hand.
  • Models 4405 and 4705 sanders come with a rubber backing pad, spindle nut, wrenches, and offset side handle bracket.
  • Model 4705 sander is governor controlled for maximum power at a low rpm.
  • Adjustable side exhaust.
  • Removable side handle.
  • Choice of lever or lockout lever throttle.
4402-RASC Offers extra heavy duty grinding capability in a slimmed down handle design.
4705-RA Aluminum polisher/sander shown with pad.
4405-RAS Steel polisher/sander/grinder shown with a pad. The .9 HP motor provides plenty of power for rust and material removal.

4402-RAS picture coming soon

 

  
Model Case Material Speed Spindle Type Overall Length Motor Dia. Side to Center Distance Angle Head Height Weight Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
4401-RAS Steel 11,000 3/8-24 or 5/8"-11 8 5/16"
211mm		 1 5/8"
41mm		 13/16"
20.6mm		 2.84"
72.1mm		 2.6 lbs
1.1kg		 3/8" 3/8" .9 H.P.
675 W		 25 cfm Parts Print
4402-RAS 14,000 Parts Print
4401-RASC 11,000 1/4" Collet Parts Print
4402-RACS 14,000 Parts Print
4405-RAS 9000, 11,000 13,500 rpm 3/8-24 or 5/8"-11 Parts Print

 

Governed Models

Model Case Material Speed Spindle Type Overall Length Motor Dia. Side to Center Distance Angle Head Height Weight Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
4705-RA Specify: Steel or Aluminum 6000, 9000 or 11,000RPM 3/8-24 or 5/8-11 8 5/16"
211mm		 1 3/4"
44mm		 13/16"
20.6mm		 2.84"
72.1mm		 2.6 lbs.
1.1 kg		 3/8" 3/8" .9 H.P.
675 W		 25 cfm  

* For a lockout lever, add a "K" to end of model number.
** For a steel model, add an "S" to end of model number when ordering.
*** For a 5/8-11 spindle, add a "Z" to end of model number.

Recommended working air pressure: 90 p.s.i.
Standard Equipment:
4401 & 4402: choice of 3", 4", 5", or 6" guard, spindle nut, wrenches, screen bushing, side handle.
RAC MODELS: Spindle wrenches, screen bushing.
4405 & 4705: choice of 4", 5", or 6" sanding pad, spindle nut, wrench, side handle, offset handle bracket, screen bushing.
Extra Cost Equipment: 3/8",5/8", 7/8" I.D. depressed center wheel adaptor kits, lockout lever.

 

46-RA SERIES RIGHT ANGLE GRINDERS & SANDERS

Features:

  • A small stainless steel right angle head resists corrosion and abrasion.
  • Spiral-beveled gears provide smooth operation and long life.
  • Aluminum or rugged steel case.
  • Adjustable side exhaust. Slip-fit motor design for simple maintenance.
  • Hardened steel motor parts.
  • Choice of lever or lockout lever throttle.
46-RAC Angle grinder with built-in 1/4" collet. Small head for the harder-to-reach applications. Choice of lever or lockout lever throttle.
46-RAS Angle grinder with 3/8-11 spindle and a 4" guard. Choice of lever or lockout lever throttle.
Model Case Material Speed Spindle Type Over Head Height Side To Center Distance Overall Length Motor Dia. Weight Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
46-RA Alum. 11,000 or 13,500RPM which is Standard 3/8-24 x .980 Long 2.806" .765 8 7/8"
225mm		 1 5/8"
41mm		 2 lbs.
10 oz.
.9kg		 3/8" N.P.T. 1/4" .9 H.P.
675 W		 25 cfm Parts Print
46-RAS Steel Parts Print
46-RAC Alum 1/4" collet (Built-In) 2.280" Parts Print
46-RACS Steel Parts Print
46-RAW Alum 3/8-24 x .580 long 2.406" Coming Soon
46-RAWS Steel Coming Soon
* For a lockout lever, add a "K" to end of model number.
** For a steel model, add an "S" to end of model number.

Recommended working air pressure: 90 p.s.i.
Standard Equipment: 46-RA and 46-RAW: 4" guard, wrenches, spindle washers, nut , screen bushing.

46-RAC: 2 collet wrenches, 1 screen bushing.

Extra Cost Equipment: 3/8" I.D. depressed center wheel adaptro kit, lockout lever.

 

48-RA SERIES RIGHT ANGLE GRINDERS & SANDERS
(NEW FOR YEAR 2006) (Our featured tool)

Model 48RA in action.

Model 48 Series Features:

  • Extra heavy-duty angle head and spiral bevel gears for long life.
  • Tall gear design provides more power at a lower rpm.
  • Model 48-RADS has a three piece collet with available insert sizes from 1/4", 1/8", 5/16",3/8".
  • Removable size handle.
  • 360 degree adjustable side exhaust.
  • Choice of lever or lockout lever throttle.
Model 48RA angle grinder shown with guard. Model 48-RASZ angle grinder shown with a 5/8"-11 spindle and 5" guard shown on the left.
Model 48RADS shown with mounted point. Model 48-RADS shown with a a three piece collet with available insert sizes from 1/4", 1/8", 5/16", 3/8".

 

Model Case Material Speed Spindle Type Overall Head Height Side to Center Distance Overall Length Motor Diameter Weight Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
48-RAS Steel 9,000 to 11,000 RPM 3/8-24 x .980" Long

3.061"
77.7mm

 .821"
20.8mm		 9.406"
238.9mm		 1 5/8"
41 mm		 3.7 lbs.
1.7 kg		 3/8" N.P.T. 1/4" .9 H.P.
675 W		 25 cfm Parts Print
48-RASZ Steel 5/8"-11 x .980" Long Parts Print
48-RADS Steel 3-piece collet Specify collet insert size. 3.00"
76.2mm		 Parts Print

 

50-RA SERIES RIGHT ANGLE GRINDERS & SANDERS (.9 H.P.)

Features:

  • Extra small stainless steel right-angle head resists corrosion and reaches remote areas.
  • Extended slim tool style provides a long reach in a confined work area.
  • Large straight cut bevel gears provide strength in a tough work environment.
  • Aluminum or rugged steel case.
  • Needle and ball bearings guarantee firm spindle support.
  • Adjustable side exhaust.
  • Slip-fit motor design for simple maintenance.
  • Choice of lever or lockout lever throttle.
50-RAS Steel angle grinder. The .9 HP motor provides plenty of power for rust and material removal. Extra small stainless steel right-angle head resists corrosion and reaches remote areas.
50-RACS Small head for the harder-to-reach applications. This angle grinder features a built-in 1/4" collet.
50-RAD Aluminum angle grinder with small head for hard to reach applications. (note: this model has a 3 piece collet design)
Model Case Material Speed Spindle Type Overall Head Height Side to Center Distance Overall Length Motor Diameter Weight Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
50-RA Alum. 11,000 or 13,500 RPM 3/8-24 x .875" Long 2.125" .562" 10 1/4" 1 5/8"
41 mm		 3 lbs.
1.4 kg		 3/8" N.P.T. 1/4" .9 H.P.
675 W		 25 cfm Parts Print
50-RAS Steel Parts Print
50-RAW Alum. 3/8"-24 x .625" Long 1.812"  
50-RAWS Steel  
50-RAC Alum. 1/4" collet (built-in) 2.062" Parts Print
50-RACS Steel Parts Print
50-RAD Alum. 1/8" or 1/4" collet insert (Note: 3 piece collet) 3.000" with collet Parts Print
50-RADS Steel Parts Print

* For a lockout lever, add a "K" to end of model number.
** For a steel model, add an "S" to end of model number.

Recommended working Air pressure: 90 p.s.i.
Standard Equipment: 50-RA And 50-RAW: 4" guard, wrenches, spindle washers, nut , screen bushing.
50-RAC: 2 collet wrenches, 1 screen bushing.
50-RAD: 2 collet wrenches, 1 screen bushing, (1) 1/8" or 1/4" insert for 3 piece collet.
Extra Cost Equipment: 3/8" I.D. depressed center wheel adaptor kit, lockout lever.