Skip Navigation
Send E-MailCompany InformationCall us at 212-555-1212

Henry Tools Online

43 SERIES GEARED BUFFERS
GRINDERS & SANDERS

Features:

  • a compact series of tools ideal for sanding, buffing or grinding work at a low rpm.
  • Precision planetary gearing provides smooth operation.
  • Models 431 & 433 Series feature tandem planetary gears for maximum power at a low rpm.
43-GL features a Erickson type collet. Planetary gears for maximum power at a low rpm.
Model 431-GLE Grinder 431-GLE can be ordered with a 3/8-24 or 5/8-11 spindle. Planetary gears for maximum power at a low rpm.
Model 432GL Grinder Pic 432-GL has a super low rpm for all your buffing needs. Maximum power at a low rpm.
Model Spindle Type Speed Weight Side to Center Distance Length Inlet Size Hose Size Rated Power
Working
Air Consumption
 Parts Print
43-GL 3- Piece collet with 1/8", 1/4", 5/16", 3/8" available insert. 1,800; 2,200; 3,000; 3,500 rpm 2.0 lbs 7/8" 6" 1/4" 3/8" .9 H.P.
675 W		 25 cfm  
43-GLE 2.2 lbs 9"  
432-GL 600; 800; 1,100; 1,400 rpm 2.5 lbs 7 1/4"  
432-GLE 2.8 lbs 10 1/4"  
431-GL 3/8-24 or 5/8-11 Thd. 1.9 lbs 6 1/2"  
431-GLE 2.2 lbs 9 1/2"  
433-GL 1,800; 2,200; 3,000; 3,500 rpm 2.6 lbs 7 3/4"  
433-GLE 3.0 lbs 11 3/4"  

* For a lockout lever, add a "K" to end of model number.
** For a 5/8-11 spindle add a "Z" to end of model number
Recommended working air pressure: 90 p.s.i.
Standard Equipment: 43-G & 432-G: Choice of collet insert, wrenches.
431-G & 433-G: Wheel washers, spindle nut, wrenches.

 

47-G & 47-GH SERIES GOVERNED DIE GRINDERS

Model 47GL Die Grinder pic

Features:

  • Hardened steel motor parts.
  • Adjustable side exhaust deflector.
  • An all stainless steel governor that provides maximum torque at a steady low rpm.
  • Available in either an aluminum or rugged steel case.

Model 47GLK (shown on left)

Model 47GHLS extended die grinder pic Model 47-GHLS extended horizontal die grinder. Governor controlled for maximum torque at slow speeds. This tool can be used with cut-off wheels or a collet for use with carbide burrs and flap wheels. (Shown with steel case)
Model Case Material Weight Speed Spindle Type Length Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
47-GL Alum. 1 5/8 lbs., .7kg 7,000 to 15,000 rpm 3/8"-24 7"
178mm		 1 3/4"
44mm		 3/8" N.P.T. 3/8" .9 H.P.
675 W		 25 cfm  
47-GLS Steel 2 3/4 lbs., 1.2 kg    
47-GHL Alum. 2 7/8 lbs., 1.3 kg 12 7/8"
327mm		    
47-GHLS Steel 4 1/4 lbs., 1.9 kg    

* For a lockout lever, add a "K" to end of model number.
Recommended working air pressure: 90 p.s.i.
Optional Equipment: In place of wheel guard, 1/4" or 3/8" collet.

 

39-GH SERIES SUPER EXTENDED LENGTH DIE GRINDERS

Features:

  • Quick change spindle design easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
  • Internal isolated sub-spindle and air motor design reduces vibration.
  • Slim extended length models reach remote areas.
  • 360 degree adjustable side exhaust.
  • Choice of lever or lockout lever throttle.
Model 3922GHLSZK extended die grinder pic 3922-GHLSZK shown with 5/8-11 spindle with a cone wheel. Tool is 22" in length. Easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
Model 3927 GHLSC Extended die grinder pic 3927-GHLSC is a whopping 27" long. Slim extended length provides access to remote areas.(shown with collet)
Model 3717GHLST extended die grinder picture. 3717-GHLST Grinder also features a quick change spindle. Easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
MOdel 3912GHLS Die grinder shown. 3912-GHLSI Grinder showing a standard 3/8-24 spindle for use with cut-off wheels. Easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
Model Case Material Spindle Type Speed Overall Length Weight Dia. Front Housing Motor Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
3912-GHLS Steel Choice of 3/8-24, 1/2-13, 5/8-11 x 1.000" (2.5cm) Long or 1/8", 1/4", 5/16", 3/8" collet. 15,000
18,000
20,000
22,000
RPM		 12"-304mm 3.5 lbs.,
1.59kg		 1.120"
2.5cm		 1.625"
2.5cm		 3/8"
1cm		 3/8"
1cm		 .9 H.P.
675W		 25 cfm  
3917-GHLS 17"-431mm 4 lbs.,
1.82kg		  
3922-GHLS 22"-558mm 4.5 lbs.,
2.05kg		  
3927-GHLS 27"
685mm		 5 lbs.,
2.27kg		 Parts Print

* For a lockout lever, add a "K" to end of model number.
** Add a "C" to end of model number for a collet. 1/r" collet insert is standard.
*** Add a "Z" to end of model numbe for a 5/8-11 spindle.
**** Add a "I" to end of model number for a 3/8-24 spindle.
***** Add a "T" to end of model number for a 1/2-13 spindle.

Recommended working air pressure: 90 p.s.i.
Standard Equipment: Choice of spindle type or collet, wrenches, screen bushing.

 

40-GH SERIES EXTENDED DIE GRINDERS

Model 40GHL Die grinder shown with 4" Guard. 40-GHL Die grinder with aluminum body. Very lightweight and has heavy-duty double row bearings that provide maximum spindle support.
Model 40GHLS die grinder shown with 2 piece collet. 40-GHLS Die grinder with steel body. Featuring heavy-duty double row bearings that provide maximum spindle support.
Model 40EHL Die grinder pictured. New for 2006. 40-EHL has a small diameter front housing and built-in 3 piece collet that can reach remote areas. NEW
Model 40GHERLS die grinder with Erickson collet. 40-GHERLS has a small diameter front housing and built-in 3 piece collet that can reach remote areas.

Model 40EH+6 super extended grinder with Erickson collet.

NEW UPDATED TOOL!!

 40-EH+6 is an ultra-extended length 18" long grinder for working in tighter hard-to-reach areas. NEW
Model 40GHLS+6" extended die grinder shown without guard for clarity. Ultra heavy duty. 40-GHLS+6" die grinder has heavy-duty double row bearings providing maximum spindle support. This tool is an extended model of 18" in length for 2 handed operation. (Specify either a collet for use with carbide burrs or guard for use with cutoff wheels when ordering)(Wheel guard not shown for clarity.)

Features:

  • The 40-GHL Series features heavy-duty double row bearings providing maximum spindle support.
  • Extended housing allows two-hand operation.
  • Hardened steel motor parts.
  • 360 degree adjustable side exhaust.
  • Available in either an aluminum or rugged steel case.
  • 40-GHERLS Series has a small diameter front housing and built-in 3 piece collet that can reach remote areas.
  • Choice of lever or lockout lever throttle.

 

Model Case Material Weight Speed Spindle Type Length Dia./Front Housing Motor Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
40-GHL Alum. 2 3/4-lbs
1.2 kg		 15,000, 18,000, 20,000, 22,000 RPM 3/8-24 x 1 1/16" long 12"
304mm		 1.500" 1 3/4" 1/4" 1/4" .9 H.P.
675W		 25 cfm Parts Print
40-GHLS Steel 4 lbs
1.8 kg		 Parts Print
         
40-GHLS+6 Steel 4 1/2 lbs.,
2 kg		 18 1/4"
463.5mm		 Parts Print

40-EHL(NEW)

 Steel 3 lbs., 4 oz.
1.47kg		 choice of 1/8", 1/4", 5/16", 3/8" insert 11.65"
296mm		 1 " Parts Print
40-GHERLS Steel 3 lbs., 4 oz.
1.47kg		 11.65"
296mm		 Parts Print

40-EH+6 (NEW)

 Steel 4 1/2 lbs
2 kg		 18 1/4"
463.5mm		 Parts Print

* For a lockout lever, add a "K" to end of model number.
Recommended working air pressure: 90 p.s.i.
Standard Equipment:

  • 40-GHL(S) & 40-GHLS+6: 3" or 4" wheel guard, wheel washers, wrenches, spindle nut, screen bushing.
  • 40-GHERLS: Choice of (1) insert: 1/8", 1/4", 5/16", 3/8". Collect wrenches, screen bushing.

Optional Equipment: 40-GHL(S) & 40-GHLS+6: IN place of wheel guard, a screw on 1/4" or 3/8" collet.
Extra Cost Equipment: 3 piece screw on collet (209), Lockout lever.

 

40-G & 40-GH SERIES EXTENDED SPINDLE DIE GRINDERS

Model 41GLS+6" extended length spindle for hard to reach areas. 41-GLS+6 die grinder has a 6" extended spindle for reaching remote areas with a cut-off wheel. A screw on collet for carbide burrs can be attached.
Model 40GL die grinder shown with extended spindle. Aluminum case for weight issues. 40-GL+3 die grinder has a 3" extended spindle with a built-in collet for grinding work down into hard to reach areas.
40-GLS+6 die grinder has a 6" extended spindle with a built-in collet for grinding or polishing work in remote areas.
Model 40GHLS+3" with double front bearings and extended spindle shown. 40-GHLS+3" die grinder has heavy-duty double row bearings providing maximum spindle support. This tool has an extended spindle of 3 inches for use with flap wheels.
Model 42GHL ALuminum die grinder shown without guard for clarity. 42-GHL aluminum die grinder has heavy-duty double row bearings providing maximum spindle support. Your choice of a 4" guard for cut-off wheels or a collet for use with carbide burrs, etc.
Model Case Material Weight Spindle Type Length Speed Dia. Inlet Size Hose Size Rated Power Working Air Consumption Parts Print
40-GL+3" Alum 1 5/8 lbs
.7 kg		 1/4" Collet (built-in) 8 1/2"
215.9mm		 15,000 or 18000RPM 1 3/4"
44mm		 3/8" N.P.T 1/4" .9 H.P.
675W		 25 cfm Parts Print
40-GL+6" 1 3/4 lbs
.8 kg		 11 1/2"
292.1mm		 Parts Print
41-GL+3" 1 5/8 lbs.
.7 kg		 3/8-24 Thd. 9 1/2"
241.3mm		 Parts Print
41-GL+6" 1 3/4 lbs.
.8 kg		 12 1/2"
317.5mm		 Parts Print
40-GHL+2" 2 3/4 lbs.
1.2 kg		 3/8-24 x 3 1/16" long 14"
355.6mm		 15,000 18,000, 20,000, or 22,000rpm Parts Print
40-GHLS+2" Steel 4 1/4 lbs
1.9 kg		 Parts Print
40-GHL+3 Alum 2 3/4 lbs
1.2 kg		 3/8-24 x 4 1/16" long 15"
381mm		 Parts Print
40-GHLS+3 Steel 4 1/4 lbs
1.9 kg		 Parts Print
42-GHL Alum 2 1/2 lbs 1.1kg 3/8-24 x 1 1/16"long 8 5/8"
219mm		  

* All the above models are available in a steel case. Add a "S" to end of model number.
** For a lockout lever add a "K" to end of model number.

Recommended working air pressure: 90 p.s.i.
Standard Equipment:

  • 40-G & 41-G Series: Two wrenches, wheel washers, screen bushing
  • 40-GH & 42-GH Series: Two wrenches, wheel washers, spindle nut, screen bushing.

Optional Equipment: In place of guard, 1/4" or 3/8" collet.
Extra Cost Equipment: Lockout lever, 3 piece screw on collet (209).