SMALL WHEEL HORIZONTAL GRINDERS (1.5 H.P.)
 |
51-HKS with lockout lever throttle and your choice
of 3"or 4" Wheel
Guard.
- Features a powerful (1.5 H.P.) motor.
- Runs 18000RPM Standard.
- Your choice of either a collet or guard. (Specify when ordering).
|
 |
51-HLS with screw-on 1/4" Collet. A 3/8" collet
is available upon request. Features a powerful (1.5 H.P.) motor. |
 |
57-HKS with lockout lever throttle.
- Standard rpm is
12000RPM with your choice of a guard or collet.(guard not shown
for clarity)
- Features a powerful (1.5 H.P.) motor.
|
|
57-HKS-BGA
- Shown with special belt grinding attachment.
- Grinder is shown with the optional lockout lever throttle.
- Standard
rpm is 12000RPM with your choice of a
guard or
collet.(guard
not
shown
for
clarity)
- Features a powerful (1.5 H.P.) motor.
|
NEW FOR 2006 |
511-HLS with 5/8-11 stub spindle for plug type wheels.
- (Safety lock lever is also available.) Features a powerful (1.5
H.P.) motor.
- Speed rated between 15000-18000RPM (You specify the RPM you need.
|
NEW FOR 2006 |
517-HLS with 5/8-11 stub spindle for plug type wheels.
- (Safety lock lever is also available.) Features a powerful (1.5
H.P.) motor.
- Speed rated between 7000-15000RPM (You specify the RPM you need.
|
| Model |
Throttle Type |
Speed |
Spindle Type |
Net Weight |
Overall Length |
Air Inlet |
Hose Size |
Rated Power |
Working Air Consumption |
Parts Print |
| 51-HLS |
Lever |
15000 to 18000RPM (specify when ordering)
(18000RPM is standard)
|
Your choice 3/8-24 or 1/2-13 x 1" (25mm)
Spindle
|
6 1/8 lbs
2.8 kg
|
17.8"
431 mm
|
1/2"N.P.T. |
1/2" |
1.5 H.P.
1.13 Kw
|
35 cfm |
Parts Print |
| 51-HKS |
Lockout Lever |
Parts
Print |
| 51-HGS |
Spade Grip |
Parts
Print |
| 511-HLS |
Lever |
5/8-11 x .900"
(22mm)
|
Parts Print |
| 511-HKS |
Lockout Lever |
5/8-11 x .900"
(22mm)
|
Parts
Print |
GOVERNED MODELS
| Model |
Throttle Type |
Speed |
Spindle Type |
Net Weight |
Overall Length |
Air Inlet |
Hose Size |
Rated Power |
Working Air Consumption |
Parts Print |
| 57-HLS |
Lever |
7000 to 15000 R.P.M. (specify when ordering)
(12000RPM is standard)
|
Your choice 3/8-24 or 1/2-13 x 1" (25mm)
Spindle
|
8.0 lbs
3.7 kg
|
18.5
457mm
|
1/2"N.P.T. |
1/2" |
1.5 H.P.
1.13 Kw
|
35 cfm |
Parts Print |
| 57-HKS |
Lockout Lever |
Parts
Print |
| 57-HGS |
Spade Grip |
Parts
Print |
| 517-HLS |
Lever |
5/8-11 x .900"
(22mm)
|
Parts Print |
| 517-HKS |
Lockout Lever |
5/8-11 x .900"
(22mm)
|
Parts
Print |
| 517-HGS |
Spade Grip |
5/8-11 x .900"
(22mm)
|
Parts
Print |
This series of small wheel horizontal grinders are lightweight yet rugged
tools. These tools are ideal for use with plug wheels, 3" and 4" grinding
wheels or collet chuck work (carbide burrs, etc.).
52-H SERIES HORIZONTAL GRINDERS (2 H.P.)
 |
Model 52HL with 6" Wheel Guard |
 |
Model 52-HSJ with Lockout Throttle and 5/8-11 Stub Spindle for use with
cone and plug wheels |
 |
Model 52-HG with Spade Handle and 6" Guard. Note:
All 52-H series grinders have this spade handle available. (specify when
ordering)
|
| Model |
Throttle Type |
Speed |
Net Weight |
Overall Length |
Spindle |
Air Inlet |
Hose Size |
Rated Power |
Parts Print |
| 52-HL |
Lever |
6000, 9000 or 12,000 R.P.M |
7 1/2 lbs.-3.4 kg |
18 1/4"- 464mm |
5/8-11 x 2 1/4 long or 1/2-13 x 2 1/16 long |
1/2" N.P.T |
1/2" |
2 H.P. or 1.5 KW |
Parts Print |
| 52-HS |
Lockout Lever |
6000, 9000 or 12,000 R.P.M |
7 1/2 lbs.-3.4 kg |
18 1/4"- 464mm |
5/8-11 x 2 1/4 long or 1/2-13 x 2 1/16 long |
1/2" N.P.T |
1/2" |
2 H.P. or 1.5 KW |
Parts
Print |
| 52-HG |
Spade Grip Handle |
6000, 9000 or 12,000 R.P.M |
8 1/3 lbs- 3.7 kg |
18 1/4"- 464mm |
5/8-11 x 2 1/4 long or 1/2-13 x 2 1/16 long |
1/2" N.P.T |
1/2" |
2 H.P .or 1.5 KW |
Parts
Print |
| 52-HSJ |
Lever |
6000, 9000 or 12,000 R.P.M |
7 1/2 lbs.-3.4 kg |
18 1/4"- 464mm |
Stub spindle for use with CONE WHEELS |
1/2" N.P.T |
1/2" |
2 H.P .or 1.5 KW |
Parts
Print |
The 52-H horizontal Grinders provide high power-to-weight ratio in a slim
tool. Versatility and power make the 52-H excellent for fast metal removal
and tight quarter cleaning jobs. This tool is ideal for use with wire brushes,
4" and 6" type 1 wheel applications, or cone and plug wheels.
Recommended working air pressure: 90 p.s.i.
Standard Equipment: 6" Closed end wheel guard, wheel
flange wrench, screen bushing.
- Features:
- Rugged steel housing
- Choke-type exhaust provides quiet air motor operation.
- Hardened steel motor parts for extended life.
- Double-row bearing provides firm spindle support.
- Model 52-HJ with stub arbor is ideal for use with cone and plug type wheels.
- Choice of lever, lockout lever, or spade grip handle.
 |
The 52-H series Grinders feature a high-Force Stainless Steel governor
maintains maximum power under load for quick metal removal. |
56-H SERIES HORIZONTAL GRINDERS (3 H.P.)
 |
Model 56-H Grinder with 6", 8" or 9" Guard.
A safety lock handle is available as well. (Shown) |
 |
Model 56-H Grinder with 3" extended spindle for use with flap
wheels.
Note: The entire horizontal grinder series can be
ordered with the spade handle shown on the left.
|
 |
Model 56-H Grinder shown with a cone wheel adaptor. (Specify when ordering) |
 |
Model 56-H Grinder with 6",8" or 9" Guard.
A safety lock handle is available as well. (Shown
with 9" Guard) New for 2004 |
| Model |
Throttle Type |
Speed |
Spindle Type |
Overall Length |
Side to Center Distance |
Weight |
Rated Power |
Inlet size |
Hose Size |
Working Air Consumption |
Parts Print |
| 56-HL |
Lever Throttle |
4500 to 8000 RPM (6000 rpm is standard) |
5/8"-11 x 1 13/16" long |
20 1/8"
524 mm
|
1 1/4"
32 mm
|
10 1/2 lb.
4.8 kg
|
3 H.P. |
1/2" N.P.T. |
1/2" |
45 cfm
21.2 L/S |
Parts Print |
| 56-HS |
Safety Lockout Lever Throttle |
4500 to 8000 RPM (6000 rpm is standard) |
5/8"-11 x 1 13/16" long |
20 1/8"
524 mm
|
1 1/4"
32 mm
|
10 1/2 lb.
4.8 kg
|
3 H.P. |
1/2" N.P.T. |
1/2" |
45 cfm
21.2 L/S |
Parts
Print |
| 56-HG |
Spade Grip Handle |
4500 to 8000 RPM (6000 rpm is standard) |
5/8"-11 x 1 13/16" long |
20 1/8"
524 mm
|
1 1/4"
32 mm
|
10 3/4 lb
4.9 kg
|
3 H.P. |
1/2" N.P.T. |
1/2" |
45 cfm
21.2 L/S |
Parts
Print |
The 56-H Horizontal Grinder can perform material removal and finishing work
quickly and efficiently. It is adaptable for use with 6",8" or 9" type
1 straight grinding wheels, cone wheels, and wire brushes.
Recommended working air pressure: 90 p.s.i.
Standard Equipment: Your choice of (1) 6",8" or
9" guard or a cone wheel adaptor, wheel flange 2" wrench, spindle
nut. One screen bushing.
- Features:
- Corrosion resistant stainless steel governor keeps the tool at a steady
R.P.M. while maintaining maximum power.
- Heavy-duty double row bearings provide maximum spindle support.
- Common motor parts with 56-V Series reduces spare parts inventory.
- Internal muffler built into the motor housing assures a quiet operating
tool without loss of power.
- Front seal in bearing cap keeps dirt from entering bearings
- Choice of lever, lock-out lever or spade grip throttle.
- Extra Cost Equipment:
- - For a tool with a 2" longer spindle, add +2 to end of model number.
The total spindle projection is now 3 13/16".
- - For a tool with a 3" longer spindle, add +3 to end of model number.
The total spindle projection is now 4 13/16".
65-H SERIES HORIZONTAL GRINDERS (4 H.P.)
| Model |
Throttle Type |
Speed |
Spindle Type |
Overall Length |
Side to Center Distance |
Weight |
Rated Power |
Inlet size |
Hose Size |
Working Air Consumption |
Parts Print |
| 65-HL |
Lever Throttle |
4500 to 8000 RPM (6000 rpm is standard) |
5/8"-11 x 1 13/16" long |
20 7/8"
530mm
|
1 1/4"
32 mm
|
12 1/2lb
5.67 kg
|
4 H.P. |
1/2"NPT |
1/2" |
50 cfm
23.6 L/S |
Parts Print |
| 65-HS |
Safety Lockout Lever Throttle |
4500 to 8000 RPM (6000 rpm is standard) |
5/8"-11 x 1 13/16" long |
20 7/8"
530mm
|
1 1/4"
32 mm
|
12 1/2lb
5.67 kg
|
4 H.P. |
1/2"NPT |
1/2" |
50 cfm
23.6 L/S |
Parts
Print |
| 65-HG |
Spade Grip Handle |
4500 to 8000 RPM (6000 rpm is standard) |
5/8"-11 x 1 13/16" long |
20 7/8"
530mm
|
1 1/4"
32 mm
|
12 1/2lb
5.67 kg
|
4 H.P. |
1/2"NPT |
1/2" |
50 cfm
23.6 L/S |
Parts
Print |
The 65-H Horizontal Grinder is one of the most powerful grinders ever manufactured.
This tool is designed for heavy metal removal and finishing operations on welds,
castings, forgings, or any metal construction. It is adaptable for use with
6", 8" or 9" type 1 straight grinding wheels, cone wheels, and wire
brushes.
Recommended working air pressure: 90 p.s.i.
Standard Equipment: Your choice of (1) 6",8" or
9" guard or a cone wheel adaptor, wheel flange 2" wrench, spindle
nut. One screen bushing.
- Features:
- Corrosion resistant stainless steel governor keeps the tool at a steady
R.P.M. while maintaining maximum power.
- Heavy-duty double row bearings provide maximum spindle support.
- Common motor parts with 65-V Series reduces spare parts inventory.
- Internal muffler built into the motor housing assures a quiet operating
tool without loss of power.
- Front seal in bearing cap keeps dirt from entering bearings
- Choice of lever, lock-out lever or spade grip throttle.
- Extra Cost Equipment:
- - For a tool with a 2" longer spindle, add +2 to end of model number.
The total spindle projection is now 3 13/16".
- - For a tool with a 3" longer spindle, add +3 to end of model number.
The total spindle projection is now 4 13/16".
|
