1300 SERIES BENCH & FLOOR RAMMERS
Features:
- Models 1320 & 1350 Series are available with extended pipe & throttle for
use as a floor rammer.Powerful yet rugged lightweight construction.
- Adjustable packing gland maintains maximum power with low maintenance.
- Easy start & stop lever throttle.
- Rod wiper keeps packing free from sand and other foreign matter.
 |
Model 1300-OB Rammer. A Super duty sand rammer that provides fast,
powerful blows for ramming small, medium and large flasks on the bench
or floor.
Intended for ramming of casting sand in cylinders, core boxes, large
moulds and casting pits. This rammer can be used for tamping work,
for instance with filling sand, and stamping or refractory furnace linings.
Available with different size butts. |
 |
Model 1320-2BA Ideal for compacting sand molds in
a foundry or casting facility, the sort size, light weight and long throttle
lever
allow this unit to
be used
on small models that are set up waist high. Its unique "sand wiper" seal
excludes dirt and grit from inside the tool for reduced wear and long
life. Available with different size butts.
|
 |
Model 1350-2BA Rammer ideal for use when you need more
compacting force featuring a 4" stroke. Also featuring a long throttle
lever
allowing this unit to
be used
on small models that are set up waist high. Its unique "sand wiper" seal
excludes dirt and grit from inside the tool for reduced wear and long
tool life. |
 |
Model 1350-2BF This unit is easily held from a standing
position while compacting very large molds at floor level. Optional front
end butts....
Ideal for
compacting
sand in molds that cannot be accessed with a bench style rammer. Available
with different size butts. |
| Model |
Rammer Type |
Length & Diameter |
Weight |
Bore |
Stroke |
Blows per Minute |
Inlet Size |
Working Air Consumption |
Parts Print |
| 1300-OB |
Rammer |
17"L.- 1.7" |
5 lbs. |
1" |
2" |
2500 |
1/4" |
20 cfm |
|
| 1320-2BA |
Rammer |
16 1/2" L - 2.3" |
8 lbs. |
2 1/2" |
1725 |
1/2" |
Parts Print |
| 1320-2BF |
Floor Rammer |
42"L - 2.3" |
11 lbs |
|
| 1350-2BA |
Rammer |
19"L - 2.3" |
12 lbs |
4" |
1240 |
Parts Print |
| 1350-2BF |
Floor Rammer |
47"L - 2.3" |
14 lbs |
|
Recommended working air pressure: 90 p.s.i.
Standard Equipment: One butt or Pein, Screen bushing.
PEINS & RUBBER BUTTS FOR RAMMERS
| Part No. |
Description |
Pictures |
| 832924 |
2 3/8" Diameter Steel Butt |
 |
| 832925 |
3" Diameter Steel Butt |
|
| 829556-AR |
1" x 2 1/8" Aluminum/Rubber Pein |
 |
| 829557-AR |
3/4" x 2 3/8" Aluminum/Rubber Pein |
|
| 829558 |
2 3/8" Diameter Rubber Butt |
 |
| 829558-AR |
2 3/8" Diameter Aluminum/Rubber Butt |
|
| 829559 |
3" Diameter Rubber Butt |
|
| 829559-AR |
3" Diameter Aluminum/Rubber Butt |
|
|
